La série S est fournie avec des rouleaux godronnés par enlèvement (double passage entrecroisé), frein à courant parasite, cellule de charge et seulement des composants de haute qualité ; afin de garantir la précision et la flexibilité typiques des Bancs d’Essai Bapro. La série S (Standard) a été conçue pour tous les ateliers qui souhaitent mettre en œuvre les services de diagnostic, de révision, Tuning et chip Tuning pour puissances moyennes / faibles. Comme tous nos produits, le choix des composants et les normes de qualité les plus élevées, garantissent la quasi absence d’entretien et une fiabilité maximale dans le temps. Synchronisation des axes : afin de garantir une précision et une répétabilité maximales des tests, la synchronisation des essieux avant et arrière est réalisée par logiciel, sur la base du brevet Bapro.
✔️ Utilisé par les constructeurs de véhicules électriques
Mechanical features:
- Roller diameter: 240 mm
- Roller width: 660 mm
- Qualité d'équilibrage G 2.5
- Overall dimensions mm: 4160 x 3130 x h. 360
- Max weight per axle: 2.000 kg
Performances:
- Maximum speed: 250 km/h
- Maximum measurable power: 800 HP (400 HP per axle)
Power supply:
- voltage (Dyno) single phase 230 VAC
- voltage (Fan cooling system) 3/N/PE 400VAC
- frequency 50 Hz
- fuses 16 A
- compressed air 6 bar
Advantages:
- Shorter repair time (fast and exact diagnosis)
- effective use of the instruments already present in workshop (diagnosis equipment, gas analyzer)
- Avoid any risks from road tests (traffic, accidents, fines)
- Results certification (performance enhancement)
- Accessories sale improvement by result verification (exhaust systems, efi controller etc..)
- Second-hand vehicles sale improvement by engine health certification
- Vehicle check before second-hand trades
- Renting for tests and technical checks
Measuring program:
- Trasmission verification (clutch slippage)
- Power step test
- Power sweep test
- Cooling system check (radiator, fan sensor, thermostatic valve)
- Diagnosis by gas analyzer under load
- Vehicle test with constant speed
- Vehicle test with constant force
- Vehicle test with constant load
- Road simulation (slope, drag resistance, weight)
- Vehicle test with constant RPM
- Durability tests
- Engine mapping to all RPM
- Diagnosis by scantool during road simulation
- 2 Eddy currents brakes, 8 rollers knurled over the entire width, finished by cut knurling
- Electric adjustment of vehicle wheelbase; pneumatic vehicle lifter, with integrated rollers lock
- Fully functional management software
- Double ventilation system movable on wheels, target power 6 kW, flow rate 44.000 m3/h (4 kW optional)
- Single ventilation system movable on wheels, target power 3 kW, flow rate 22.000 m3/h (2 kW optional)
- Lambda kit: 5 wires wide band Lambda probe and controller
- Boost pressure input 0÷2.5 bar relative pressure ± 0.035 bar error. (Requires outer meteo sensor box)
- Lambda Input connect a vehicle lambda probe with an external controller (Outer meteo sensor box)
- High width aluminum loading ramps. Needed when the dyno is installed on ground.
- Computer trolley built by heavy duty lasting steel, Pro: heavy duty, movable, wide working surface
- Proportional ventilation speed control adjusting the fan speed in function of the rollers speed
- Infrared remote control test bench management directly from vehicle cockpit
- Roller covers protect the rollers when the dynamometer is not working
- Personal computer and display
- Safety Equipments: Side safety barriers with logo panels, Anchoring ratchet straps, High attenuation ear muff
- OBDII parameters reading and dtcs deleting without the need for additional hardware and dedicated interfaces.
| BPA-2R HP | BPA-4R HP | BPT-2R | BPA-2R S | BPA-4R S | |||
| Performance | |||||||
| Maximum speed | 360 km/h | 360 km/h | 200 km/h | 250 km/h | 250 km/h | ||
| Maximum adsorbable power | 650 HP | 1300 HP | 400 HP | – | – | ||
| Maximum measurable power | 1000 HP | 2000 HP | 900 HP | 400 HP | 800 HP | ||
| Maximum traction force | 8000 N | 16000 N | 16000 N | – | – | ||
| Mechanical features | |||||||
| Rollers diameter | 400 mm | 400 mm | 400 mm | 240 mm | 240 mm | ||
| Rollers width | 700 mm | 700 mm | 700 mm | 660 mm | 660 mm | ||
| Roller balancing grade | G 2.5 | G 2.5 | G 2.5 | G 2.5 | G 2.5 | ||
| Equivalent base inertia | 450 Kg | 900 Kg | 550 Kg | 240 Kg | 480 Kg | ||
| Dimensions | 3470×1135 mm | 4360×3470 mm | 3470×5300 mm | 3070×870×310 mm | 4160×3130 mm | ||
| Deck height | 410 mm | 460 mm | 640 mm | 360 mm | 360 mm | ||
| Weight | 2500 kg | 2500 kg | – | 2000 kg | 2000 kg | ||
| Voltage | 400 V 50 Hz 3/N/PE | 400 V 50 Hz 3/N/PE | 400 V 50 Hz 3/N/PE | 220 V 50 Hz 1/N/PE | 220 V 50 Hz 1/N/PE | ||
